Description

Adopting the EN 733 standard, it features a motor with an energy efficiency rating of IE4/IE5. Optional configurations include SuPremE or PumpDrive 3, and a frequency converter integrated onto the motor. The shaft seal is pre-equipped with a replaceable shaft sleeve. It also includes a volute and a housing cover with a replaceable pump body sealing ring.

Application

Deliver colorless or corrosive liquids that do not cause chemical or mechanical corrosion to pump materials

water supply system

Cooling circuit

swimming pool equipment

fire protection system

irrigation equipment

drainage equipment

heating equipment

air conditioning equipment

Sprinkler irrigation equipment

Parameter

Maximum flow rate: 740 m3/h

Maximum lift: 160 m

Maximum operating pressure: 16 bar

Maximum allowable medium temperature: 140 °C

Advantage

1. The experiment confirmed the fluid dynamic performance of the impeller (blade), improving efficiency and NPSHreq

2. Reduce operating costs by turning the nominal diameter of the impeller according to the operating point

3. Due to its good suction characteristics and almost cavitation-free operation over a wide range, it experiences minimal wear, produces little vibration, and can operate with high smoothness

4. Utilizing a multi-chamber housing seal, it can still reliably seal the housing despite varying operating conditions

5. A wide range of standard materials is available for optimal adaptation to the conveying medium

6. It can also expand the range of structural dimensions for smaller conveying capacities

7. The removal screws on the interface area between the pump cover and the drive bracket make disassembly easy