bo.yu@sykainai.com
+86-18640398938
MF Thermal Gas Mass Flow Meter
Time:2026-05-08 Source:Shenyang Kainai Technology Co., Ltd. Editor:Shenyang Kainai Technology Co., Ltd.
INTRODUCTION
The MF thermal gas mass flowmeter is designed based on the thermal diffusion principle. It adopts the constant temperature difference method to realize accurate gas measurement. Featuring compact size, high digitalization level, easy installation and high measurement accuracy, it is widely used for flow metering of various gases, including gas measurement, flue gas measurement, compressed air measurement and chemical corrosive gas measurement.
FEATURES
1. Achieve precise measurement within the gas flow velocity range of 0.1Nm/s ~ 120Nm/s
2. Adopt constant temperature difference method; no temperature and pressure compensation required, with 1 second response time
3. Easy installation and low maintenance cost
4. Digital design with strong anti-interference capability
Main Performance Parameters
Measuring Medium | Common stable gases (Unstable media such as acetylene, boron trichloride cannot be measured) | ||
Nominal Diameter | DN65~DN1000 Optional | Accuracy Class | ±2.5% |
Response Speed | 1s | Flow Velocity | (0.1~100) Nm/s |
Alarm | 1~2 Channels Normally Open Contacts | Material | 304 Stainless Steel |
Working Pressure | Medium Pressure ≤ 2.5MPa | Output Signal | Pulse Output, (4~20)mA Output |
Power Supply | 220VAC; 24VDC Power > 18W | Temp. Range | Sensor: (-40~+300)°C Converter: (-20~+45)°C |